When, on a drawing, if a part of a line or some lines among many other lines need to be erased or modified, in normal way of erasing will damage the other nearby lines. In such a situation an erasing shield is effectively useful. It is a thin metallic sheet having small openings of different sizes and shapes. A suitable opening is aligned to the line to be erased and the line is removed by the eraser.

Drawing Paper

Drawing Paper is an essential material used in engineering drawing. It is mainly classified into two types:

• Hand-made Paper
• Mill-made Paper

Hand-made papers have rough surfaces and are pale in color. They are generally not used for regular drawing work but are suitable for charts. Mill-made papers are widely used for regular work and are available in different sizes and rolls. These papers are specified by their weight (kg per ream) or density (grams per square meter).

• understand to fold the A1, A2 and A3 size drawing sheets • keep the drawing sheet filing cabinet • filing cabinet to handle according to IS procedure.

Method of folding of printed drawing sheets as per BIS SP:

46-2003 When drawings sheets are in more numbers, they have to be folded and kept in order to save the trace required for preserving them When the drawings are to be released to shop floor for reference during manufacturing of a component

Drawing board is one of the main equipment of Draughtsman. It is used for supporting the drawing paper/tracing paper for making drawings. It is made of well seasoned wood strips of about 25 mm thick or masonite, free from knots and warping. It should be softer enough to allow insertion and removal of drawing pins. Two battens are fastened to the board by screws, in slotted joints. They prevent warping and at the same time permit expansion and contraction of the strips due to the change of moisture in the atmosphere.

It is of ‘T’ shape, made of well seasoned wood. It has two parts., head and blade. One of thr edge of the blade is the working edge. The blade is screwed to this head such that the working edge is at right angle to head 

The standard ‘T’ square are designated as follows with dimensions shown in mm; as per IS:1360-1989.

mini drafter is an important device used for making drawing quickly& accurately. This instrument gives faster drawing as it like the purpose of T Square, Set Square, Protractor and scales.

A mini drafter is an important device used for preparing drawing quickly & accurately. With the use of mini drafter the drawing of building, apartment, industries are planned accurately & too in very less time.

It serves the functions of a Tee square, set square, protractor and scale. They come in different sizes and a pattern called ‘Pantagraph’ type. It is fitted on the top left side, edge of the drafting board, mounted on an adjustable frame or table. It requires large area of working place. The angle of the drafting board can be adjusted by pedal operating system. There are two counter weights to balance the angular position of the board and the drafting head. It is more suitable for production drawing office.

It has a knee joint in one leg that permits the insertion of pen or pencil point or attaching lengthening bar with pen or pencil point attached to it. It is used for drawing large circles/arcs also for taking large measurements. The pin on the other leg can be swivelled to vertical position when drawing large circles, while drawing the circles of arcs it should be held in such a way that the needle point leg and pencil point leg should be bent so as to make perpendicular to the paper.

बड़ा डिवाइडर एक महत्वपूर्ण ड्रॉइंग उपकरण है जिसका उपयोग माप (dimensions) को स्थानांतरित (transfer) करने तथा रेखाओं को समान भागों में विभाजित करने के लिए किया जाता है।

These are made in many different shapes, normally come in sets of 6,12,16 etc. French curves are best suited to draw smooth curves/ arcs (which cannot be drawn by a compass) with ease. To draw a smooth curve using french curve first set it by trial against a part of the line to be drawn, then shift it to the next portions. Each new portion should fit atleast three points on the curve just drawn. It should be seen that the curve (radius) is increasing or decreasing smoothly and no corner should be formed on the curve